Tag Archives: Epson Wireless Printer

15Sep/19

How to Resolve Epson Printer Error Code 1433?

Error Code 1433 on Epson Printer mainly appears when the firmware of the printer has been damaged or out dated. If you ever experience such printer error, place a quick call at Epson printer support number. You need to download and upgrade the firmware to Resolve Epson Printer Error Code 1433.

Epson Printer Error Code 1433

Epson Printer Error Code 1433 utterly indicated a Firmware error. A lot of issues may appear when the firmware of a printer is corrupted. You may witness offline error and other typical printer related issues.

Effective Step By Step Process to Fix Epson Printer Error Code 1433:

As you start getting this Epson printer error 1433, you might get freak out. There are not many solutions available on the internet to make this error disappear. But this blog contains all the necessary illustrious information to make this error disappear.

  • Whenever this error appears, the first thing that you need to do is to disconnect all the USB cables. Make sure you remove all the USB cables from the rear side of the printer without turning it off. If you are using a wireless Epson Printer, you no need to follow the step.
  • Next you need to remove all the ink cartridges from the printer.
  • Take out the paper from the paper tray as well.
  • Leave it until a message appears on the screen asking you to insert the cartridges.
  • If no message appears, disconnect the power cord from the back of the printer.
  • Leave your printer for 60 seconds until it cools down.
  • Now reconnect the power cord and thus press the power button if the printer does not turn on automatically.
  • Close all the doors of the printer after reinserting the cartridges.
  • If it asks you to print a calibration page, print it.
  • Reconnect the USB cable from the rear side of the printer.
  • Try to make a print again.

Obtain Hassle-Free Services to Annihilate Multifarious Epson printer Related Errors: Call +1-888-573-0071

How to Resolve Epson Printer Error Code 1433

Whether there is any issue in your Epson Printer either related to error codes like:

Our experienced and skilled technicians are 24*7 available to assist users on any issue you have been facing in Printer. From above steps if still not getting any solution then get the best guidance via Epson Wireless Printer experts at +1-888-573-0071 and get your printer working free from Epson Printer Error code 0xea, which user is facing.

Whenever and wherever you experience such Epson Printer Error Code 1433, we proffer complete help without any extra charges.

21Apr/17

How to Configure Epson Wireless Printer to Static IP Address?

You got Epson Wireless Printer for your office purpose as well for home use. Initially you it was working smooth but suddenly struck in middle of your important work. The problem you came across was of printer kept on disappearing from the network connection. With the complaints piling up, you try harder to resolve the problem yet you fail to solve the issue.

After the study you came to the conclusion that this problem usually emerges whenever a device isn’t manually added to the router. You need to provide the fixed address to the device so that it stays in the same spot. To set the IP address of the printer you need to reserve the IP address so that it doesn’t reset every time the router or the printer is turned off. For this to work the wireless printer should already be installed and detected in the network. In case your printer is not yet connected to wireless printer, do follow the instructional guide below and align the Epson Wireless Printer to Static IP Address.

Best Steps to Configure Epson Wireless Printer to Static IP Address

Solutions to manually assign a Static IP Address in Epson Wireless Printer via following the below mentioned steps:

Stage 1: Tracing the IP Address for any OS of the PC

  • From the control panel of the Printer device get the print done for Network Configuration Page and Wireless Network Test report
  • Keep note of the Printer IP address and the gateway
  • Do the comparison of the printer IP address to the gateway IP address. Address format must be similar.

For instance:

In case of similar format

Gateway IP address 192.168.1.8

Printer IP address 192.168.1.6

In different format

Gateway IP address: 169.254.254.245

Printer IP address: 169.254.254.1

Stage 2: Configure the Wireless Printer to Static IP Address

  • Type the printer IP address in your Internet browser address bar and press return. Web page will be displayed showing the internal settings of the printer
  • Click on networking tab than on wireless tab and then IPv4tab. Manu path will be different depending on the model of the printer
  • On the appeared page perform the following steps:
    • Set the manual IP from the note you took from stage #1
    • For subnet address uses 255.255.255.0 unless you know that it is different.
    • Use gateway IP founded in stage #1 for gateway address and fill the first DNS
    • Leave the second DNS field bank and click apply
  • Get the print of another network configuration page to verify that your printer IP address is what you assigned
  • Switch off the wireless printer and router
  • Restart the router
  • After the router fully boots restart the wireless printer

Quick Assistance For Epson Customer Support Toll free Number : @ USA : +1-888-573-0071

After this troubleshoots you don’t have to add your printer every time to get your work done. Contact Epson Customer Support Number USA @ +1-888-573-0071 (toll-free) and get assisted if you are failing do troubleshoot on your own.