Category Archives: Common Issues

30Sep/19

How To Fix Epson Error Code 0xF3?

This Epson error code 0xF3 may occur due to foreign objects that are stuck inside the printer or any other printer obstructions are being found. We here in our blog provide you simple step to troubleshoot Epson Printer error code 0xf3 in the easiest way possible.

Our team of technicians will assist you to Fix Epson Error Code 0xF3 in some easiest steps.

Epson Error Code 0xf3

Causes of Epson Error Code 0xf3

Below are the potential factors which can cause this issue:

  • Pieces of paper can get stuck between the gears of the paper feed and thus cause this issue.
  • A paper jam within the printer can even cause this issue.
  • You’ll get Epson error code 0xf3 because of jammed or detached ink vacuum tubes in the Epson printer.
  • When you ask you feed into the printer an oversized number of documents, the printer fails to scan them. As a result, it cannot perform the printing and ends up in Epson error code 0xf3.
  • If the above problems don’t seem to be causing this error along with your printer, then there could also be internal conflict inside your printer.

Potential Symptoms of Epson Printer Error Code 0xf3

 In this section, you may notice some common symptoms which may be responsible for this error:

  • Error code “error code 0xf3” appears endlessly on the pc you’re using.
  • Crashes the running program.
  • Your Epson printer doesn’t print anything.
  • Your device might run sluggish and won’t connect with the printer.

Easy Hacks to Resolve Epson Printer Error Code 0xf3

Method 1: Check Your Epson Printer

This is the fundamental technique by that you’ll solve issue in a second. To do so, at first, you need to turn off your printer and separate the cartridge from it. You must also remove the rear parts like USB, pen drives, hard disks etc if connected. Now, set out the ink level of the printer and remove the panel screws from it. Next, you need to clean the inner region with a dry piece of a cotton swab. It’ll help to get rid of the dirt stored in it. After that, reattach the components once more to their respective places. Now, plug in the printer and print a page. Check if the problem gets resolved or still showing on the screen.

Method 2: Check Ink Levels

If you do not have adequate ink within the printer then Epson printer error code 0xf3 can bother you. Hence, perform this fix and solve your issue without any delay. The primary issue you need to do is to switch on your printer. Then, press the start button open control panel. After that, select the option “Printers and Faxes” by double-clicking on that. Then, you have to right-click on the icon “Preferences.” Now, choose the Services option and select “Service this Device.” By this method, the toolbox will open on the screen and you need to choose “Estimated Ink Level” by clicking on that. the color and ink levels of the cartridge will show on the screen. Finally, choose your preferred level and check if the error still persists or not. However, if you’re unable to visualize the level then you need to fill the cartridge properly.

Method 3: Working with the printer’s digital display panel

  • To get rid of the error, users are advised to dismount the LCD also as the front panel of the device.
  • Now de-attach the back panel screws of the Epson printer to manage the process carefully

Method 4: Removing the main back cover

  • Users are instructed to get rid of the main back section to deal efficiently with the LCD display features
  • Gently clean the left encoder section of the printer device with the assistance of dry kleenex tissue
  • Next users are advised to gently clean the right encoder of the device with the assistance of dry kleenex paper

Method 5: Testing the printer

  • If users are required to test the printer then, they have carefully inserted the paper and the cover 2 switches with the assistance of the paper scotch tool.
  • At last, you wish to remount the printer carefully however before confirm that you simply have removed the scotch by following steps in reversing mode.

For more such Epson issues, dial at Epson Printer Support Number +1-888-573-0071

Whether there is any issue in your Epson Printer either related to error codes like:

Our experienced and skilled technicians are 24*7 available to assist users on any issue you have been facing in Printer. Dial at +1-888-573-0071 to connect with the Epson Printer Customer Care team to resolve issues faster. We are fully engrossed with a team of proficient and skillful technicians who holds deep knowledge of resolving every minute to minute issue. Technicians are available 24*7 hours to assist users in fixing up any type of Epson issue.

18Dec/18

How To Connect Epson Printer to Mac? Benefit of Connect Epson Printer to Mac

With excellence printing features and wide variety of printing solutions you can take the Greatest Benefit of Connect Epson Printer to Mac for Various Work and Home Solutions to get the requirement task done on time. Below are the few top amenities of Epson printer. In below mentioned blogs learn about the How To Connect Epson Printer to Mac features and functionalities that your requirement are fulfilled.

Connect an Epson Printer to ComputerWhen at home or out and about, Epson Connect allows Epson Users to print from practically any device, anywhere. With a wide variety of services you’ll be surprised what you can achieve with your Epson printer.

How to Connect Epson Printer to Mac?

Follow the Simple Methods below to enable Epson Connect for your Epson printer on a Mac.

  1. Download and run the Epson Connect Printer Setup Utility.
  2. Click Continue.
  3. Agree to the Software License Agreement by clicking Continue, and then Agree.
  4. Click Install, and then click Close.
  5. Select your product, and then click Next.
    Note: If the window doesn’t automatically appear, open a Finder window and select Application > Epson Software, and then double-click Epson Connect Printer Setup.
  6. Select Printer Registration, and then click Next.
  7. When you see the Register a printer to Epson Connect message, click OK.
  8. Scroll down, click the I accept the Terms and Conditions check box, and then click Next.
  9. Do one of the following:
    • If you’re creating a new account, fill out the Create An Epson Connect Account form, then click Finish.
    • If you’re registering a new product with an existing account, click I already have an account, fill out the Add a new printer form, and then click Add.
  10. Click Close.
  11. See our Activate Scan To Cloud and Remote Print instructions to activate the Scan to Cloud and Remote Print services.

For Workplace Solutions:

How To Connect Epson Printer to Mac

How To connect a printer to my iPhone?

Use AirPrint to print from your iPhone, iPad, or iPod touch
  1. Open the app that you want to print from.
  2. To find the print option, tap the app’s share icon — or — or tap .
  3. Tap or Print. …
  4. Tap Select Printer and choose an AirPrint-enabled printer.
  5. Choose the number of copies or other options, like which pages you want to print.
  6. Tap Print in the upper-right corner

Benefit of Connect Epson Printer to Mac and Get all kinds of businesses and office usages

  • A one-stop-solution for all types of corporate, businesses, enterprises and industrial environments of all sizes; no matter what types of business they are.
  • Discover extremely high-performance business oriented printers for home use or for small office teams

Work Force Pro printers

When you can easily take the advantage of single, multi-function, ultra-high-yield printing and low printing costs features while using the branded Epson printers.

Point-of-sale printers

  • Work with highly advanced point-of-sale technology and robust features that offer value-added functionality features to grow your business and run it efficiently as possible.
  • Increase the chances of productivity by reducing the cost of pre-printed labels with Color Works solutions.
  • When the Epson Printer is deliver dependable and extreme profitable inkjet printing facility with fast-drying, durable color ink amenities then it is the best you have.
  • For Home Solutions: Discover new ways of printing process by Epson home printer solutions which enables you to bring ideas to your life.Expression printers
    • Find fully-featured printing results
    • Highly compact and versatile Expression printers
    • All-in-one solution for the whole family
    • Compatible for both Windows and Mac devices.

    Picture Mate printers

    • Comes with huge flexibility to instantly print and share professional quality prints.

    Label Works label printers

    Highly organized and offers huge flexibility to users to express their creativity.

    Call +1-888-573-0071 and Get Effective Solutions To Connect Epson Printer to Mac

Connect with our skilled; qualified and expert tech team at Epson connect printer setup Team which is available for different group of customers using different kind of printing services worldwide. We work 24 hours to meet their daily demands for various workings issues faced by them. We believe in customer satisfaction and have the best track record of the highest success rate to identify customer’s problem and solve them instantly with successful results. In case you are looking for tech support you can call to Epson Customer Support Number any hour of day and night and searching for online assistance and get the issues resolved instantly and immediately via calling us on our toll-free +1-888-573-0071 number and we will get back to you via online tech support service with the best customer care you can have the support at doorstep.

13Aug/18
Fix Epson printer slow printing issue

Amazing Ways to Fix Epson Printer Slow Printing Problem: Resolve Slow Printing Issues at the Earliest

Electronic gadgets have brilliantly simplified the age-old process of managing paperwork. Along with computers and laptops, printers have occupied an essential place in the daily schedule of the users. Seiko Epson is a popular Japanese brand which manufactures a diverse range of Epson printers which stand out among all the top printer brands across the world largely due to its unmatched built-in features and robust quality. However, these advanced features often fall short to resist technical glitches and your Epson printer develops many complicated errors.

Slow printing happens due to a plethora of reasons such as printer spooler not working properly, damage in any components, etc. It reduces the efficiency of your printer and creates an unnecessary interruption in your printing session. Contacting with a reliable printer technician is the best option to solve this slow printing error without damaging your printer. Keep reading this write-up to know everything about slow printing problems and try your hand at quick repair methods.

What Makes Your Epson Printer Run Slow?

Struggling with slow printing issue while performing an important printing task is the most annoying thing that you can ever experience during a printing session. Go through the list of factors which leads to Epson printer slow printing:

Fix Epson printer slow printing issue

  • Printer spooler is not working properly
  • Any printer component is malfunctioning or has developed a damage
  • Expiry of the ink cartridge
  • Error in the print settings
  • A faulty installation of the printer driver
  • Jamming of paper or any other foreign object inside the printer
  • Slow network connection
  • Issue in the power supply
  • Accumulation of dust in the print head
  • The printer is running out of ink
  • The printer has not been reset for a long period
  • Too much print jobs are jammed in the print queue

You can wipe out these above mentioned factors by handling your device with proper care.  Despite strictly following the usage guidelines, printing issues can arise to baffle an amateur in the technical field. Futile attempts to resolve the issue by yourself will increase the chances of damage to your device. Trust your Epson printer with a crew of highly skilled printer technicians who can offer printer maintenance service at a budget-friendly price and solve Epson printer slow printing problem with 100% accuracy.

Quick Steps to Resolve Slow Printing on Epson Printer

As soon as you encounter Epson printer suddenly slow, you can connect with a reliable service provider for the instant solution. You can also try to fix this problem on your own by following the simple steps discussed below.

  1. Check and reset print quality settings
  2. Inspect whether the network cables are properly plugged in or not
  3. Avoid printing documents on duplex mode and try to print on single-sided mode
  4. Reset the printer driver software
  5. Close all other applications on your PC or laptop
  6. Check and remove any foreign article from the printer in case it is stuck inside the device
  7. Replace your existing ink cartridge with a new one if you find it to be expired
  8. Remove all print jobs stuck in the print queue and try to place fresh printing signals one by one
  9. Clean the print head with a dry cotton cloth to remove dust
  10. Check and reset the print spooler in case it is malfunctioning

If you are facing the same issue over and over again, you need to connect Connect Epson Printer Setup Utility with our professionals at Epson Printer Support. They will provide you with printer maintenance services at a pocket-friendly price to fix slow printing on Epson printer.

Are You Searching for Reliable Printer Repair Service? Contact Us +1-888-573-0071 for Instant Support!

Tired of facing difficulties to overcome slow printing on Epson printer? Are you looking for professional assistance to get rid of this problem? Your search for “printers repair near me” ends with us. The tech experts at Epson Support provide the best quality of printer repair services across the globe. Our engineers work on your issues without making you wait for a long time and assure you with guaranteed fixes. If you want to talk to our experts to avail expert assistance, you can call at our helpline number +1-888-573-0071  at any time of the day. Furthermore, you can catch us via our mail support or live chat support option during busy hours of the day. Stop searching for “printer repair near me and connect with us to avail our class-apart printing solutions.

18May/18
Fix Computer Freezes Issues When Trying to Print in Epson Printer

How to Fix Computer Freezes Issues When Trying to Print in Epson Printer?

Sometimes printer issues appear from nowhere. You pass a printing command and suddenly you come across a printing error. On such circumstances, Epson Printer Support Number proffers the best help that you can have. With years of experience, they will help you Fix Computer Freezes Issues When Trying to Print in Epson Printer.

 

When you try to print through Office or Adobe Reader or even through Word pad doc, your printer does not whirl into action. The command goes into ‘not responding mode’. There are many possibilities due to which the error may appear. The outdated driver, improper connection, compatibility issues and so on are prime reasons for this error.

Efficacious Solutions to Troubleshoot Computer Freezes Issues When Trying to Print in Epson Printer:

Before starting the troubleshooting process, first, create a restoration point. If anything goes wrong, you will at least have the backup of your system. Perform the steps as directed to avoid mistakes. Else you can also connect with Epson printer repair services to get smooth and hassle-free troubleshooting services.

Solution 1: Check the Printer Spooler Service is on or not

  • First of all, you need to right-click on Computer followed by clicking on Manage.
  • Pull down the Services menu and applications when the console opens.
  • Now double click on Print Spooling Key after clicking on Services.
  • Navigate to Startup Type in General option and thus set the value to Automatic.
  • Now click on Start to start the Spooler Service.
  • Restart your system after clicking on Apply. Look for the computer freezes when printing windows 10 error on the display screen.

Solution 2: Alternate Solution

  • Navigate to Control Panel after clicking on the Start button.
  • Choose Programs and Features followed by clicking on “Turn windows features on or off”
  • Enable the options LPD and LPR after expanding “Print and Document services”.
  • Disable Internet Printing Client and thus restart the computer.
  • Re-install the drivers and check whether the printing is possible or not.

Grab Our Epson printer Support Phone Number +1-888-573-0071  for Complete Efficient Help:

If you have followed all the steps as per instruction and the issue still appears, call our experts at Epson Customer Care Number and get a hand to hand information to get the issue resolved. Other than that, they will also guide you which solution will be better depending on your printer model and problem. Call now, avail this opportunity.

04May/18
Epson Printer Network Problem

How to Resolve Epson Printer Network Problem?

Network problems are the common ones when you are using a wireless printing device. It is utmost necessary to Resolve Epson Printer Network Problem to go on with the printing process. On such occasions, Epson Printer Support Number proffers incredible help.

There comes much time when you Epson printer does not show any network connection. It constantly creates problem while running over a particular network. Such error not only creates sheer frustration but also interrupts your printing. if your Epson Printer is not visible on a certain network, you will no longer be able to pass printing command.

Efficacious Solutions to Resolve Epson Printer Network Problem:

This is the most general error that affects your printing. There is nothing much to worry about as the error is as simple as it may seem. Whenever such situation appears, you can either read the blog out or connect with Epson printer repair services for maximum help.

Solution 1: Check Network Connection Settings

First of all, you need to make sure whether you have recently made any changes or not. The change in network structure disturbs your printing. If somehow the network connection fails, you need to check report that will help you to fix up the problem.

Solution 2: Disable and Initialize the Network Settings

You can also shut down and thus restart the Network settings on your system. To do so, you need to open the Wi-Fi Network Settings and thus restart it after few moments. Depending on the model, the process can vary.

Solution 3: Update Printer Firmware

Check whether you have the latest firmware installed or not in the system. if you update the firmware in time, it will help you resolve the network error in time. Install and update the Epson printer firmware whenever you face any such situation.

Solution 4: Check Network and Printing Status

Check the network and the printing status of connection speed, connection method and IP address and so on. Read out the details and try to resolve the annoying Epson printer Wi-Fi connection problems.

Connect on +1-888-573-0071 with Epson Printer Support Phone Number to Annihilate Printer Issues:

In case you are unable to deal with the Epson printer network connection failed issue, we are here to help you out. With proper step by step guidance, our support team will take care of all the issues that you are facing. No matter how much time it takes, we are at your service 24*7. Hence call the number for at desk troubleshooting results.

31Mar/18
How to Resolve Epson Printer Waste Ink Pad Error

How to Resolve Epson Printer Waste Ink Pad Error?

To store used ink, every Epson printer comes with a waste ink tank or ink pad. It contains the inks used during print head charging or cleaning. When the Waste Ink Tank fills up, you need to Fix Epson printer waste ink pad error as early possible. With the help of Epson Printer Support Number +1-888-573-0071, you make this error disappear.

Epson Printer Waste Ink Pad Error

When you press the “clean print head” button, ink pumps out of the ink cartridge and stores into the waste ink pad. Over the time, the waste tank starts to fill up. It may create ink flow and bad quality print outs. To prevent your printer from overflowing and leaking, Epson printer stops printing functions. When the store capacity of the waste ink tank comes to an end, Epson Printer Waste Ink Pad Error is certain. The printer will then refuse to print anything. You need to reset the printer error to make your printer working and running again.

Effective Steps to Troubleshoot Epson Printer Waste Ink Pad Error:

To make this Epson Printer Waste Ink Pad Error disappear, you need to download a reset program. It will reset your printer back to 0 and your printer will start acting normally again. In this blog, you can find a free reset utility tool to repair this waste pad error. You can also grab Epson printer customer care service to get to the roots of the error.

  • First of all, download a reset utility tool from a trusted website.
  • After the download process, you need to install it in Program Files.
  • Ensure that the printer is properly connected with the system with the help of a USB cable or parallel cable.
  • Turn the printer on and look for a new icon that appears of the display screen.
  • Click on the little printer that appears.
  • When a new window pops up, choose the printer model from the drop down menu.
  • If you have multiple printers connected to your computer, choose the one that is causing the error.
  • Now click on the Ink Monitor Tab followed by clicking on Refresh.
  • Make sure that the printer is properly communicating with the printer.
  • When the “printer is ready” appears, turn of the printer and then on again.
  • Now printing again as the Epson Printer Waste Ink Pad Error has disappeared.

Why to Rely on Epson technical support?

Our Support team accumulated the following qualities and features that make us best in the market:

  • Round the clock support everyday
  • Remote Assistance as per Customers’ needs
  • Instant Identification of Problems
  • Quality Services at Low Costs
  • 99 % Accuracy Level

Grab 24*7 Epson Support Services for complete Epson printer repair services:

 

Epson Printer SupportIn case, the issue still persists, dial up our Epson printer Customer Care Number for instant hand to hand help. We will understand your need and avail help as per your error that has bugged your printer.

14Mar/18
Epson Printer Print

Why Won’t My Epson Printer Print, How to Fix?

Epson Printer Error are uncertain. You never can predict when your Epson printer will stop working. On such occasions, Epson Printer Repair Service Number +1-888-573-0071 offers world class experience. Many people have no idea Why Won’t My Epson Printer Print?” It leaves many in frustration creating work delays. You need to put on your troubleshooting hat when your printer suddenly stops printing.

There are huge list of reasons which may come about into this error. Your printer may look fine. However, you never recognize what isn’t right inside the printer. The by the book information association isn’t all that matters. You have to dive deep to comprehend the reason for such blunders. Contingent upon the brand of the printer that you are utilizing, the blunder changes.

  • Why won’t my Epson printer print
  • My wireless printer won’t print
  • Canon printer won’t print
  • HP printer won’t print from computer
  • My HP printer is not printing

No matter what error is troubling you, this blog will work like a magic. This will help you to disappear any trouble that you will experience within your printer.

Effective Solutions To Troubleshoot Epson Printer Won’t Print Error:

Whenever you face such sort of errors, do not freak out. Follow the solution of the blog to get rid of such error in no time. You can also connect with Epson Printer Technical support Number  for further help.

Solution 1: Bad Connection

A free association, a blemished wire can have a considerable measure of effect. When you have such kind of mistake, the main thing that you should see is the association among printer and framework. In some cases the power link that you are utilizing may end up being unequipped for the best possible execution. On the off chance that you associate a wire with an excessive number of outer gadgets, the execution tumbles down. What’s more, it confines to execute too. Utilizing another link and reconnecting printer and the framework straightforwardly, will take care of the issue.

Solution 2: Check Consumables

Is your printer showing offline error? If yes, it probably means that the paper, ink and toner has run out. Check the ink level in the output jobs monitor. And also look for paper tray alert and ink blinking error. Replace the supplies if necessary. Else use a full set of consumables. Also check for paper jam. And remove any struck paper or debris inside the printer roller.

Solution 3: Cancel Queued Output Jobs

When you printer cannot perform a print job, delete all the jobs that being held on the queue. Pause all the queued jobs and remove them one by one. Now press the relevant key that is leveled as “Online” and thus click on “Go” button. This will put the printer back in service.

Solution 4: Update Driver Software

Printer Driver works as a bridge between Printer and the Computer. Driver sends printing command for successful printing. Corrupted driver, improperly installed driver and equivalent update can merge this error in. update your Printer Driver using a trusted website to fix this error.

Hurry! Call now at +1-888-573-0071 Epson Printer Customer Service Number for More Help:

 

Epson Printer SupportIf any printer related errors is giving you nightmares, instantly look for online assistance from our services. Epson Printer Customer Support Number is a toll free number with 24*7 supports availability. We make sure all our customers are getting satisfactory results. No matter what sort of printer error you are having, we are ready to assist you every time. Hence dial the number to get personalized results at desk.

21Jul/17

How To Fix Epson Printer Can’t Scan Over Network Error?

The “Can’t Scan Over Network Error in Epson printer occurs if users have turned off the scanner and they have incorrectly established a connection and there are no errors indicated. It also occurs if you have not performed the restart process of the computer after the installation of the scanning software. Users here in this blog will be introduced with detailed description of each step where it will teach you how to troubleshoot cannot scan in network in Epson printer.

Steps to Fix Can’t Scan Over Network Error in Epson printer

Step 1: Event Manager Program

  • Make sure the “Event Manager program” is not blocked by the firewall or any via other security software. Start the Epson Scan process before scanning with thestart button.
  • Now, users are needed to launch the Epson scan process before scanning from the scanner button.
  • It is to be noted that if a large part of the document is being scanned at a high resolution, a network communication error may surely occur. So, making attempt to scan again at a lower resolution is recommended.

Step 2: Turn off The Scanner

  • If you are unable to restart the Epson Scan, turn off your scanner, turn it back on and restart the Epson Scan again.
  • Check for the proper connectivity settings to test whether the Epson Scan Settings connection processes well or not?
  • Make sure that the “Connection setting” is set to the Network mode and then click on the Test button.
  • If you are using OS X then, open the “Applications folder” first and hit on the Epson Software icon
  • Tap on the “EPSON Scan” Settings icon to establish a Connection setting to the Network accurately. Hit on the “Test” button now. Proceed to next step to solve “cannot scan over network issue” in Epson scanners

Step 3: Disabling Firewall And Other Anti-virus 

  • Make sure that you have chosen the “Timeout Setting” option in the Epson Scan Settings to complete scanning over a network process.
  • Next, disable the firewall and any anti-virus software on the wireless router.
  • If the message appears as “Network product is not available: currently being used by user” then, there communication issue is the cause between the scanner and the computer. Restart the scanner in this case.
  • Make use of the “Epson Scan on a network” process which supports IPv4.
  • At last, just open the Epson Scan Settings icon, hit on “Add” icon, and enter the IP address for your scanner.

Dial at Epson Customer Support Number +1-888-573-0071 for Solving Epson Scanner issues!

Get in touch with Epson Customer Support professionals to get world-class support solutions 24*7 that are comprehensive to experience by users. We are happy to assist customers in their difficult times as and when faced by them. Our solutions are unique in nature which makes us stand distinguished from other brand. Call us now and solve issues instantly.

10Jun/17

how to change Epson printer color settings on Epson printer? +1-888-573-0071

If you have purchased an Epson printer and configured with your computer, but now when you try to print your document, there is a problem occurring in print Black and White ink.  Is it correct? If yes, then don’t worry about it! Actually, something went wrong with your Epson printer. You might need to Modifying color settings on Epson printer, in the proper way, for correct printing.

Therefore, Epson Printers usually come with a diversity of color cartridges. And by default, your Epson color printer uses the black ink darker color. But if you need to print a document in a different color, then you can modify your printer preferences on your Windows or Mac OS X computer accordingly.  So, if you want to know the process that How to Print in Black and White on Epson Printers? Or want to how you can easily Modifying Epson Color Settings, then you just need to follow the below steps to instant fix it.

Steps To Modifying Epson Printer Color Settings:

For Windows:-

  • First of all, open the document that you wish on printing in black and white.

Epson printer setting

  • Then you have to tap on the “File” menu and then choose “Print” option.

Epson printer color setting

Now you have to check the Epson printer properties, which you wish to use is highlighted on-screen.

Epson printer color setting

  • It’s time to hit on either “Properties” or “Preferences”, according to your Epson printer models.

Epson printer color setting

  • Then you need to click on the “Advance” tab labeled.

Epson printer color settings

  • Next, you have to hit on “Black/Grayscale” in the “color” radio button, according to your choice.

Epson printer colors settings

  • Hit “OK button.

7

  • Now your document will now ready for print in black and white color ink.

8

For Mac OS X:-

First of all, open your document that you wish on printing in black and white.

Then hit on “File” and then choose “Print” option.

In the next step, you have to check your Epson printer & set properties that you want to use, that should be highlighted on-screen.

Now it’s time to hit on “Print Settings” and then printer options pop-up menu show on-screen.

Hit on “Grayscale” or “Black” in the “color” radio button, according to your choice.

Hit “OK” button.

Then it’s time to choose the option to print your document, and then you will be able to print in black and white ink color.

Still, if you have any doubt to pursue the above steps, then do call us at our Epson customer care toll free number to receive prompt assistance.  Through this number, you can instant connect with our team of technical support and get instantly resolved all your queries. Hence, our technicians are available 24×7/365 days for your questions.

08Jun/17

How to connect Epson printer to laptop? +1-888-573-0071

Epson printers are widely known printing devices among users worldwide. But as they are technical devices, unexpected issues are bound to happen. Well, users may often come across situations where they are faced with an issue related to How to connect Epson printer to laptop. connect Epson blog is all about getting a proper connection of Epson printer to laptop. Let’s see all the below given steps now.

Steps to connect Epson printer to laptop

Before moving ahead with the process of connecting Epson printer to laptop, make sure that your device is all set up with a wireless method or via an Ethernet connection as recommended

Step1: Initial stage

  • Get access to the “Start Here” sheet and go to “Epson printer main page” section

Step2: Download phase

  • Next, users are advised to download and then install the “Epson Connect Printer Setup Utility” feature to move ahead with the process to connect their Epson printer to laptop.

Step3: Terms and conditions

  • Next, users are required to agree to a “End-User License Agreement’ and then hit on the “Next” button.Click on “Install” button and then hit the “Finish” icon.
  • Selection of the type of product is to be selected and then tap on “Next” option.

Step4: Registration phase

  • Select the Printer Registration” icon and click on “Next” icon.
  • Tap on the “Agreeicon and then hit on “Next” option.

Step5: Registration phase

  1. When the “Register a printer to Epson Connect message, is visible, click on OK.
  2. Perform the following steps:
    1. While creating a new account, you are requested to fill out a “Create an Epson Connect Account “form and then hit “Finish” option.
    2. If anyone is registering for a new product with an existing account, then select “I already have an account” icon and fill up the “Add a new printer” form, then click
      “Add” icon next.
    3. Click the “Close” icon

For more such queries, do get in touch with us at Epson Printer Customer Support USA Epson printer support UK section and get your queries resolved instantly.